Series 10 Sucker Rod Overshot |
The Gotco, Series 10 Sucker Rod Overshot is a small, durable Overshot for retrieving sucker rods, couplings and other items from inside tubing strings.
The Gotco, Series 10 Sucker Rod Overshots are designed to retrieve Sucker Rod Boxes up to 2" O.D. inside ofT/s" tubing and up to 15/s" O.D. inside of23/s" tubing. |
Construction | The Series 10 Sucker Rod Overshot consists of a Top Sub, Bowl, Grapple, and a Guide. The internal components are used to establish a secure grip on the fish to retrieve it easily.
Depending on the diameter of the fish to be retrieved, a Spiral Grapple or a Basket Grapple will be used. When the fish diameter approaches the maximum catch of the Overshot a Spiral Grapple is required. When a Spiral Grapple is used, a Control Guide must also be used on the tool. When the fish diameter is substantially under the maximum catch limits of the Overshot a Basket Grapple is used. This assembly will require a Basket Grapple Control and a Plain Guide. |
Assembly and Operation | The Overshot should be dressed with the proper size and type of Grapple and related support equipment. Makeup the Overshot on the fishing string and run into the hole. When the Overshot nears the top of the fish, engage it by slowly rotating to the right while gradually lowering the Overshot over the fish.
Release any right-hand torque out of the fishing string and pull on the fish by elevating the fishing string. |
To Release from the Fish | Bump down the full weight of fishing string. Rotate to the right while picking up slowly. The left hand wicker threads on the inner surface of the grapple will allow the grappleto unscrew from the fish.
To Release from the retrieved fish, follow this same procedure while securing the fish below the Overshot. |
Download | | For sizes, specifications, and ordering instructions download this page in PDF. |
|  |